CNC Machining Center, DAEWOO-500S 4-Axis with Fanuc 21M CNC Control – Tsudakoma Indexers (12” & 10”), 30 Tool ATC, Spindle Drive Motor: 35 HP AC, Spindle Speed: 100-10,000 RPM, Table 47.2” x 19.7”, Load Capacity 1764 Lbs., Travels: X=40.2”, Y=19.7”, Z=20.1”.

CNC Machining Center, VMC-1050 Tree with Yasnac MX3 Control, 24 Tool ATC, 15/20 HP, 8000RPM, Table50”x22.8”, Load Capacity 2200 Lbs., Travels: X=40”, Y= 20”, Z= 20”.   

CNC Machining Center, Mori-Seiki MV 408 with Yasnac  MX3 Control, 20 Tool ATC, 10/7.5 HP, 6000RPM, Table 43”x17”, Load Capacity 1500 Lbs., Travels: X=31”, Y= 18”, Z= 20”. 

CNC Machining Center, Eagle 1000 Yang with Mitsubishi Control, 16 Tool ATC, 10HP, 6000RPM, Table 195/8” x 42 1/8”, Load Capacity 2200 Lbs., Travels: X=40”, Y= 20”, Z= 20”.
 
CNC Machining Center, VMC-800 Tree with Fanuc 180i Control, 20 Tool ATC, 12/15 HP, 8000RPM, Table Load Capacity 2200 Lbs., Travels: X=32.00”, Y =20.15”, Z=22.20” 

CNC   Machining Center, VMC-840 Tree with Yasnac Control, 24 Tool ATC, 15/20 HP, 8000RPM, Table Load Capacity 1650 Lbs., Travels: X=32”, Y=16”, Z=25”.  (3 VMC-840s!)

 CNC   Machining Center, VMC-1 Tree Kira with Fanuc 3M Control, 16 Tool ATC, 7.4 HP, 10,000 RPM, Table Load Capacity 550 Lbs., Travels: X=18”, Y=15”, Z=18”.

CNC Turning Center, Mazak Quick Turn with Fusion 640T Control,12 Station Turret, 20 HP, 4000RPM, Cutting Length = 19.68”, Spindle Bore = 2.62”, Clamping Diameter = 10” (Bar Feed) 

CNC Turning Center, Okuma Crown S Big Bore with OSP700L Okuma Control and Monochrome One Touch IGF, 12 Station Turret, 24 HP, 3500 RPM, Cutting Length = 19.68”, Spindle Bore = 2.72”, Clamping Diameter = 10”

 CNC Turning Center, Mazak Quick Turn 10 with T-1 Update Control, 8 Station Turret, 15 HP, 3600 RPM, Cutting Length = 19.69”, Spindle Bore = 2.2 “, Maximum Clamping Diameter = 8”.

 CNC Turning Center,  Mazak  Quick Turn Universal with T-1 update Control, 8 Station Turret, 15 HP, 3600RPM, Cutting Length = 19.69”, Spindle Bore = 2.2”, Maximum Clamping Diameter = 8”. 

Surface Grinder, Gallmeyer & Livingston Model 560 Automatic 14 x 36″ Magnetic Chuck

Engine Lathe, Graziano Sag 

Turret Lathe, Warner Swasey (we have 3 of these) – 12′ Bar Carrier.

Turret Lathe, Warner and Swasey Electro Cycle Chucker, Equipped with Numerous Thread Rolling Heads. 

Vertical Milling Machine, Bridgeport with Power Feed. 

Vertical Milling Machine, Super Max with Digital Readout and Power Feed 

Drilling Mill, Rong Fu with Power Feed.

Horizontal Band Saw, Marvel 15A  with Automatic Cut Off and Bar Feed.

Horizontal Band Saw, Tester.

Horizontal Band Saw, Wellsaw. 

Vertical Band Saw, DoAll 2013-V

Drill Press, Atlas with Multiple Chuck

Drill Press, Rockwell Production with Two Spindles. 

Drill Press, Chicago.

Welder, Airco-Matic Wirefeed. 

Welder, Smith Gas with Cutting Torch. 

Sand Blast Booth (Capacity – 30″). 

Cold Black Finishing Booth

Fork Lift, Caterpillar (Capacity 3000 lbs).